CLEERS Home

Tuesday, June 27


Home | Contact us


CLEERS Home > Databases >

Categories

Transient Engine Data

Total Number of Submissions: 1
Total Number of Downloads: 1517

Measurements or simulations of engine-out exhaust conditions (as close as possible to the exhaust valve) for well-defined transients, including FTP cycles. These typically include temperature, mass flow, and composition information versus time. Catalyst inlet measurements may also be included. Excel spreadsheets are preferred format.

Steady-State Engine Data

Total Number of Submissions: 0
Total Number of Downloads: 0

Measurements or simulations of engine-out exhaust conditions (as close as possible to the exhaust valve) for steady-state operation. These typically include temperature, mass flow, and composition information versus time. Catalyst inlet measurements may also be included. Excel spreadsheets are preferred format.

Engine Models

Total Number of Submissions: 0
Total Number of Downloads: 0

Recommended inlet parameters for simulating engine-out exhaust conditions using industry-standard software such as GT-Power or Wave or documented engine models that are publicly available. These typically include individual parameters required for specific engines.

Component Models

Total Number of Submissions: 1
Total Number of Downloads: 675

MATLAB, FORTRAN, or C code that models specific aftertreatment components. The output of these models typically includes conversion of one or more exhaust species, heat balances, and/or flow or pressure drop information.

Benchflow Reactor Data

Total Number of Submissions: 1
Total Number of Downloads: 553

Laboratory measurements for catalytic aftertreatment materials under steady-state or well-defined transients. Typically, the material samples used consist of monolith cores or washcoat powders. Some documentation regarding the source of the samples is required. Formulation or chemical constituent information is optional.

Downpipe Data

Total Number of Submissions: 0
Total Number of Downloads: 0

Measurements or CFD simulations of flow distributions, compositions, and temperatures for post-engine exhaust downpipe sections.

Reaction Mechanisms

Total Number of Submissions: 4
Total Number of Downloads: 7723

Proposed reaction steps and rate expressions relevant to exhaust chemistry or aftertreatment component performance. This can include elementary or global reactions and rate constants. CHEMKIN format is preferred if possible.

Species Thermodynamic/Transport Properties

Total Number of Submissions: 1
Total Number of Downloads: 1214

Thermodynamic and transport properties of exhaust species, monolith materials, and washcoat species. This includes bulk, surface, and micro-scale properties that are relevant to heats of adsorption, desorption, reaction, diffusion, and phase transformation. CHEMKIN format is preferred if possible.

Test Stand/Vehicle Component Data

Total Number of Submissions: 6
Total Number of Downloads: 17075

Measurements for catalytic aftertreatment components from test-stand or vehicle under steady-state or well-defined transients. Some documentation regarding the components and test-stand/vehicle is required. Formulation or chemical constituent information is optional.

Top Submissions

2002 ORNL Mercedes Chassis Dynamometer LNT Data
Mercedes 1.7l - DOC - LNT Sulfation/deSulfation study with intracatalyst speciation
NO oxidation and NOx storage kinetics on Pt/Al2O3 and Pt/BaO/Al2O3
Lean Gasoline Engine Vehicle
DVECSE LNT data

Top Lists

Most Downloaded
Highest Rated
Top Submitters
Most Recent

Other Activities

Submit a New File

Search Database

Search:

For:

Category:

Classifications:

Technology

Method

Disclaimer: These data were submitted to CLEERS by the author, and CLEERS committee/organizers do not have any responsibility regarding the veracity or the correctness of the data nor does it endorse any of the information given in the data file. If in doubt, please check with the author of the data at the contact information provided above.